SURFACE PREPARATION - Fresh masonry or concrete surface must be allowed to cure for at least 14 days. Concrete must be clean and rough. All oil, grease, dirt, debris, paint and unsound concrete must be removed. All cracks>1mm should be filled with suitable crack fillers. In case of metal surfaces, remove rust and contamination for better protection. Apply primer coat of QPROOF, diluting 1 kg with 1 ltr potable water, by brush, roller or spray. After the primer coat is QPROOF,diluting 1 kg with 1 ltr potable water, by brush, roller or spray. After the primer coat is completely dried, apply two coats of QPROOF. It is recommended to apply the 2nd coat perpendicularly and after the 1st coat is totally cured. For better results, Glass Fibre Mesh/cloth can be embedded in between the 2 coats. QPROOF could be diluted up till 20-30% to make the material workable. All brushes and tools should be cleaned by water immediately after use.